AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Saffire mixcontrol program8/18/2023 ![]() Saffire MixControl is the control software that is used to control the output routing and settings for the Saffire interface range. Scarlett Mix Control is the control software that is used to control the output routing and settings for the Scarlett interface range. 2) In order to hear the amped signal only while playing back, you need to hear only the right side of that stereo track. 1) Lets assume that you record like me, which is to a stereo track, where the DI signal is on the left, and the 'amp' signal is on the right. This tutorial will explain the features and settings of MixControl to allow the greatest amount of control over your interface.Įach mix allows analogue and digital inputs to be blended together with software outputs before being routed to a physical output. I use SPDIF, but the general process should be the same. SAFFIRE MIXCONTROL ONY WORKS IN DAW SOFTWARE Mixer channel input - This controls the input for the respective input channel.Įach mixer channel consists of the following. This can be a physical input or a DAW output and can be changed by clicking on the current input name. Pan control - This controls the amount of the signal sent to the left and right channels of the mix. The file saffire-mixcontrol-3.7.exe has been seen being distributed by the following 4 URLs. ![]() The file has been seen being downloaded from and multiple other hosts. Double-clicking on this control will centre the control and send an equal amount of the signal to the left and right channels.įader - The controls the level of the signal in that particular mix. The program is a setup application that uses the Inno Setup installer. Graphic meter - This displays the level of the signal in dBFS before the fader. This can be a useful way to monitor the input signal. If the signal has clipped it will display a red bar at the top of the meter. To remedy this, lower the gain and click on the red bar.Ĭhannel Mono/stereo toggle switch - This will switch the channel between one stereo channel and two stereo channels. Level meter - From left to right: Gain applied by fader (dB) Maximum level (dBFS) Current level (dBFS). SAFFIRE MIXCONTROL ONY WORKS IN DAW SOFTWARE.
0 Comments
Read More
Leave a Reply. |